One-chambered furance with arc electric heaters
Furance capacities: 700 x 1000 x 3000 mm
700 x 1650 x 2000 mm
Maximum weight of the parts is up to 3000 kg.
Hardening under press
Procedure for hardening of parts unfavorable geometry such as plate and ring gears etc. Max diameter 650 mm
Being Use in hardening of rotary parts up to max 400 mm.
Ion Nitrate Treatment
Nitriding in vacuum plasma in order to increase surface hardness, wear resistance, toughness a hard layer, dynamic endurance, strength at elevated temperatures in parts of structural, alloyed, tool steel and heat resistant after final machining without changing the measure.
Depending on the type of steel achieved the results as follows:
- Hardness of 500 to 1200 HV
- Diffusion layer depth from 0.1 to 0.4 mm
Dimensions of the test part:
- Maximum diameter of 600 mm
- Maximum length up to 1100 mm
- Maximum weight of 600 kg
Gears case-hardening, toothed shafts, dimension up to do 4000 mm, height diameter up to 2500 mm, teeth module from 10 to 30mm, maximum weight up to 5000 kg.
Pins hardening maximum to Ø 200 x 4000 mm.